Hp Compaq Pro 6305 Small Form Factor Specs Loud Fan and No Display

I have a HP Z400 desktop and have the following problem: When I startup the desktop, the buff makes a mint of noise and the background doesn't commence (black screen, none messages on the blind, non even the bios).

I get into that the motherboard is the problem but maybe someone has a suggestion or solution?


Popular Topics in HP Hardware
Which of the following retains the information it's storing when the system power is turned cancelled?
  • ROM
  • CPU
  • RAM
  • GPU
88% of IT pros got this right.

42 Replies

Yasaf Burshan
Yasaf Burshan This person is a Verified Professional
This individual is a verified professional.
Verify your account to enable IT peers to see that you are a professional.
Aug 26, 2013 at 10:01 UTC

Team Genius is an IT service supplier.

Could be the power supply likewise.

thecapt

could make up the graphics card or even the monitor.

Should can test if the proctor is on the job by upbringing information technology's independent settings on test using the monitor buttons (check it is on the correct production if IT has more than one connection VGA, DVI, HDMI, etc)

Graphics visiting card wise try removing the installed card and using another or along board card if it has one.

could easily be something o'er heating nonetheless you should understand some separate of output along screen before the reckoner cuts knocked out, (presuming it is cutting down).

trekblue98

Information technology could be anything, but I would agree with above, it can be anything from the power supply to the board, but either style the computer has get along an anchor.  We induce a power provide quizzer here, and it was cheap.  IT wouldn't atomic number 4 a bad idea to examination the power supply then if that's non the problem I would part with checking each component one at a metre.  Statistically it would be the get on but I would nonetheless check everything other too.

PJGraston

A half-witted way to discipline is to tight watch the HDD LED and the CD/DVD LED for any natural process rightfulness after startup.  If they evince no activity, then you be intimate that the machine is unsatisfactory to Put up.  Also check the capacitors on the display panel to see if they get started to flare-up.  You can tell this pretty easily just by looking for at them.  If the fantastic of the capacitors are start to tumefy or if there is any material future day out of them, then plainly they have failed.

My advice is to use the jumper on the motherboard to readjust the BIOs, check the capacitors, and pull out the RAM out of its slots and put it back in. Also find a room to test the power supply as antecedently recommended.

Ryan Neumann

I had a similar issue, and it all over up being a dead motherboard.  If you start the desktop and information technology makes a beeping noise, try to frame out where it is future from.  If it doesn't beep, chances are that it is either the motherboard or the ability supply.

JW864

+1 for Motherboard since no BIOS boot, but could beryllium PSU Eastern Samoa others said

jbakervt

Low make a point the monitor is plugged in and turned on, just to be sure... If so, then make positive the video connection cable is correctly plugged into both the monitor and graphics adapter. If you have another reminder, test with that. If the computer has a graphics card and a come apart connected-board art adapter, try that. If you are still acquiring nothing (no beep or blink codes?), try unplugging everything but the keyboard monitor and power supply and attempt in addition again (if it boots, this would indicate a power supply problem). Next maltreat would be a BIOS/CMOS reset via release/jumper along the motherboard. Then you can essa swapping the power append with a known good one.

These are USUALLY superpowe supply problems, more rarely a motherboard, just you want to prescript out the graphics card/adaptor and monitor first. Any accidental information technology's under warranty?

Ioan

Hold first with another monitor.

Dotcommie
Dotcommie This person is a Verified Professional
This someone is a supported professional.
Avow your write u to enable IT peers to catch that you are a professed.
Aug 26, 2013 at 13:03 UTC

If you don't already have a UPS for that Personal computer, I'd find single for any you get working there. I've seen plenty of awful power and surges coming to computers fritz them KO'd.

Electrical damage, the Dark Side causes.

Ryan_B
Ryan_B This person is a Verified Professional
This person is a corroborated occupational group.
Verify your history to enable IT peers to see that you are a professional.
Aug 26, 2013 at 13:24 UTC

Motherboard.  Feel for leaking or bulging capacitors.  This normally indicates an issue.

Ryan Boes
Ryan Boes This person is a Verified Professional
This person is a verified professional.
Control your account to enable IT peers to take in that you are a paid.
Aug 26, 2013 at 13:52 UTC

I've seen this happen before a couple times where a power spike or something will damage the motherboard relevant to where it won't boot heavenward, but all the fans will nonmoving spin up.  Well-nig newer motherboards will have LED indicators and if they aren't all on, it's a augury that the add-in's gone.  Good luck.

Andre S

Remove/unplug everything, including RAM, and undergo if it POSTs.

If it does, take off adding things until you find the trouble.

Aaron DeLeskie
Aaron DeLeskie This person is a Verified Professional
This person is a corroborated professional.
Control your account to enable IT peers to ensure that you are a professional.
August 26, 2013 at 15:50 UTC

Essay disconnecting everything down to the basics. 1 dumbfound of ram and television add-in. unplug everything else right to eliminate any external hardware causing the topic.

If you don't visit anything. Are there any beep codes beingness generated Oregon is it silent with just the fan spinning sprouted?  If there's beep codes you should personify able to name the failing component. If no too codes then information technology's bad untold PSU surgery Motherboard.  PSU is wanton to supercede. The motherboard is obviously more of a pain.

Bulging capacitors is the kiss of death for most motherboards so unquestionably something to look for.

Scotch1337

Which specific fan is making a noise?? If it is PSU fan and then I would coin bank along a PSU. If it is a C.P.U. fan so you might stimulate a bad CPU or Motherboard. I would insure for burst or bulging capacitors if they are there then heedless the Motherboard is bad. If it is a case fan, most likely just information technology being penitent and most of the time there is no problems cause by this being ill other than poor circulation. If it is coming from the Graphics card and so again look to bellying capacitors on the card, if you wrench the card out and spin the fan with your finger does information technology spin out with ease? Does the motherboard experience on board nontextual matter, if you take the graphics lineup impossible, assuming you have one, plug your monitor into the on dining table and turn it on. Any results?

jhogue1975

Adept Communications is an Information technology service provider.

Have you checkered the fan along the artwork card to make sure it's not the culprit?

Dale.M

What does a lot of noise mean?  A weird non-fan like disturbance, or that the devotee is running full throttle and extremely noisy equally a result?

Often when a motherboard fails it no yearner regulates the CPU buff choking, which makes the fan kick into goop RPMs the present moment you turn it on and never throttle perfect.

If it's a weird fan noise coming from the PSU, it could be the PSU, but otherwise it's pretty good betting odds the motherboard kicked the bucket.

Rambler
Rambler This person is a Verified Professional
This individual is a verified professional.
Verify your account to enable IT peers to see that you are a professional.
Aug 27, 2013 at 11:31 UTC

noisy winnow is a possible dead or dying one, that will non be chilling as designed. allowing heat to build quickly if it is fan on CPU heatsink, simply I would expect SOME activity before it bailed on Pine Tree State

would at least hope you are going to field leach the animal and give it a clean to remove disperse bunies etc

and confirm which fan will HAVE to comprise replaced as well

erst that is completed, you derriere them get on with the genuine trouble shooting

which for myself would commence at PSU - Mo/Bo A primary candidates for the issues as described

Kenny8416
Kenny8416 This person is a Verified Professional
This person is a verified professional.
Verify your account to enable Information technology peers to visualize that you are a professional.
Aug 27, 2013 at 12:40 UTC

i always start with taking out all the random-access memory and powering on.  It should claxon rather alot to complain.  If it does then the MB is proabably fine, then add the RAM 1 stick at one time, to eliminate bad RAM.

If it doesn't kick about the lack of ram then either your MB is toast, or the BIOS is drained.

Morgan7283

I would test the power supply first to make in for every connections are acquiring the correct power. This sounds like a standard ability supply replacement issue though.

Dimhelmet
Dimhelmet This person is a Verified Professional
This individual is a verified professional.
Assert your explanation to enable IT peers to see that you are a professional.
Aug 27, 2013 at 13:19 UTC

I've had faulty temperature sensors do this problem likewise on a Dingle OptiPlex.  The sensor caused the chassis lover to run at full speed and fail POST.

JBates

Re-seat the RAM modual, simply push on the clips to lift upward the modaul, then advertise it back in

Over the old age this has fixed many another Personal computer with (high fastness fan, no video) of various manufacturers.

Currently we have over 800 Lenovo PCs and I do this on 8 or 10 a year.

If the motherboard looses contact with RAM there is no more target to put BIOS software and video at POST

CCDA

does the computer beep or illume any diagnostic lights?

Does the HDD spin up?

Does it sound like the computer is booting up and just not displaying anything?

when you turn it happening do all the fans kick in high? (Just verifying this one)

when you remove the RAM does anything change?

Try disconnecting the HDD.

make a point the RAM is properly seated.

if the computer doesn't give a diagnostic claxon, the hdd doesn't fit equal it's reading, the fans kick in high mechanically and the Ram down is properly seated, then you belik experience a bad motherboard or CPU.

Ethan1979

In all the multiplication I've seen this doings its been the power provide Oregon motherboard. If it can't Wiley Post (and you've verified that the monitor is working right) the problem is likely one of those items unless you take up a discreet GPU...then it could constitute that too. Donated the fan interference you mentioned though I would bet $$$ on the Megabyte or PS....

Rey Jr.

PSU.....  simply can you tell Maine which winnow is noisy if its the psu fan so the culprit of the pc not booting mustiness be the PSU

This theme has been fast aside an executive and is no more open for commenting.

To continue this give-and-take, please ask a new question.

Hp Compaq Pro 6305 Small Form Factor Specs Loud Fan and No Display

Source: https://community.spiceworks.com/topic/374391-desktop-does-not-start-fan-makes-a-lot-of-noise

Post a Comment

Previous Post Next Post